Traceur GPS Concox JM-VL03 | Intégré à Wialon

Caractéristiques Concox JM-VL03:

Boîte à mémoire

Compatible avec Wialon:

Modification du paramètre "speed"

Afin d'identifier le boîtier Concox JM-VL03 les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	Concox JM-VL03
ID unique:	imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Concox JM-VL03 pour les utiliser dans Wialon Hosting :

Port du serveur:

22087

10725 unités Concox JM-VL03 connectées au le centre de données Wialon — Ça fait 0.46% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
pwr_ext	Voltage level	V
gsm	GSM Signal Strength
imei	imei number
imsi	imsi number
iccid	iccid number
time	Time stamp
sats	Number of satellites
visible_sats	Visible satellites
sat#_signal_strength	Satellites signal strength, where # - number
mcc	LBS Main Cell Tower, mcc
mnc	LBS Main Cell Tower, mnc
lac	LBS Main Cell Tower, lac
cell_id	LBS Main Cell Tower, cell_id
rssi	LBS Main Cell Tower, rssi
lac#	LBS Auxiliary Cell Tower, lac, where # - number
cell_id#	LBS Auxiliary Cell Tower, cell_idm, where # - number
rssi#	LBS Auxiliary Cell Tower, rssi, where # - number
gsm_signal_csq	GSM Signal CSQ
battery_vol	Battery Voltage
hdop	HDOP
sequence_num	Sequence Number
inputs	Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
boot_reason	Boot Reason
mileage	Mileage statistics
real_time_mode#	Real time current mode, where # - number
static_parameter_mode#	Static mode parameter, where # - number
is_geofence_rectangular#	Circular o rectangular, 0 is circular, 1 is rectangular, where # - id
is_geofence_exit#	Enter or Exit geofence, 1 is enter, 2 is exit, where # - id
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
status_trig_time1	Report status: Trigger time
status_reg_content	Report status: Trigger content
gps_time_status	GPS is Real Time or Reupload
alm1	Alarm Bit 1
alm2	Alarm Bit 2
alm3	Alarm Bit 3
sta1	Status Bit 1
dyd	Fuel/Electricity Cutoff Status
sos_num#	SOS number, where # - number
center_num	Centre number
fence	GeoFence
door	Door status
cit	Content of Terminal Information (heartbeat msg)
alarm	0x00: Normal 0x01: SOS alert 0x02: Power cut alert 0x03: Vibrating alert 0x04: Entered fence alert 0x05: Left fence alert 0x06: Speed alert 0x09: Tow/theft alert 0x0A: Entered GPS blind spot alert 0x0B: Left GPS blind spot alert 0x0C: Powered on alert 0x0D: GPS first fix alert 0x0E: Low external battery alert 0x0F: External battery low voltage protection alert 0x10: SIM changed alert 0x11: Powered off alert 0x12: Airplane mode on following external battery low voltage protection 0x13: Tamper alert 0x14: Door alert 0x15: Powered off due to low battery 0x16: Sound-control alert 0x17: Rogue base station detected alert 0x18: Cover removed alert 0x19: Low internal battery alert 0x20: Entered deep sleep mode alert 0x23: Fall alert 0x29: Harsh acceleration 0x2A: Sharp left cornering alert 0x2B: Sharp right cornering alert 0x2C: Collision alert 0x30: Harsh braking 0x32: Device unplugged alert
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition

Nom du paramètre

Description

Unités

pwr_ext

Voltage level

gsm

GSM Signal Strength

imei

imei number

imsi

imsi number

iccid

iccid number

time

Time stamp

sats

Number of satellites

visible_sats

Visible satellites

sat#_signal_strength

Satellites signal strength, where # - number

mcc

LBS Main Cell Tower, mcc

mnc

LBS Main Cell Tower, mnc

lac

LBS Main Cell Tower, lac

cell_id

LBS Main Cell Tower, cell_id

rssi

LBS Main Cell Tower, rssi

lac#

LBS Auxiliary Cell Tower, lac, where # - number

cell_id#

LBS Auxiliary Cell Tower, cell_idm, where # - number

rssi#

LBS Auxiliary Cell Tower, rssi, where # - number

gsm_signal_csq

GSM Signal CSQ

battery_vol

Battery Voltage

hdop

HDOP

sequence_num

Sequence Number

inputs

Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

boot_reason

Boot Reason

mileage

Mileage statistics

real_time_mode#

Real time current mode, where # - number

static_parameter_mode#

Static mode parameter, where # - number

is_geofence_rectangular#

Circular o rectangular, 0 is circular, 1 is rectangular, where # - id

is_geofence_exit#

Enter or Exit geofence, 1 is enter, 2 is exit, where # - id

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

status_trig_time1

Report status: Trigger time

status_reg_content

Report status: Trigger content

gps_time_status

GPS is Real Time or Reupload

alm1

Alarm Bit 1

alm2

Alarm Bit 2

alm3

Alarm Bit 3

sta1

Status Bit 1

dyd

Fuel/Electricity Cutoff Status

sos_num#

SOS number, where # - number

center_num

Centre number

fence

GeoFence

door

Door status

cit

Content of Terminal Information (heartbeat msg)

alarm

0x00: Normal

0x01: SOS alert

0x02: Power cut alert

0x03: Vibrating alert

0x04: Entered fence alert

0x05: Left fence alert

0x06: Speed alert

0x09: Tow/theft alert

0x0A: Entered GPS blind spot alert

0x0B: Left GPS blind spot alert

0x0C: Powered on alert

0x0D: GPS first fix alert

0x0E: Low external battery alert

0x0F: External battery low voltage protection alert

0x10: SIM changed alert

0x11: Powered off alert

0x12: Airplane mode on following external battery low voltage protection

0x13: Tamper alert

0x14: Door alert

0x15: Powered off due to low battery

0x16: Sound-control alert

0x17: Rogue base station detected alert

0x18: Cover removed alert

0x19: Low internal battery alert

0x20: Entered deep sleep mode alert

0x23: Fall alert

0x29: Harsh acceleration

0x2A: Sharp left cornering alert

0x2B: Sharp right cornering alert

0x2C: Collision alert

0x30: Harsh braking

0x32: Device unplugged alert

voltage

Voltage degree 0-6:

0: Lowest power and power off

1: No enough power to dial a call or send messages.

2: Low power and alarm

3: Lower power but can work normally

3~6: Work in good condition

Remplissez le formulaire pour commencer à travailler avec Wialon

Produits

Produits de niche pour des tâches spécifiques

Concox JM-VL03

Plus de boîtiers GPS de ce fabricant

Contactez Wialon et atteignez les objectifs les plus ambitieux en télématique

Devenir un partenaire

Demandez Wialon dans votre région

Remplissez le formulaire pour commencer à travailler avec Wialon